OPTIMIX 40 mortar
Product datasheet 
Advice & DocumentsProduct datasheet
Description
Spraying machine for mortars and exterior coatings.
Equipped with a stainless steel tank, a digital control panel and a twin-cylinder compressor.
Equipped with a stainless steel tank, a digital control panel and a twin-cylinder compressor.
Applications
Traditional mortars with admixtures, hydraulic coatings, monolayers, lime-based coatings, high-load technical and special coatings, repointing coatings...
With optional lance and pump:
Glues and E.W.I. coatings, thick plastic coatings, light hydraulic coatings...
With optional lance and pump:
Glues and E.W.I. coatings, thick plastic coatings, light hydraulic coatings...
Technical characteristics
Product pressure
0 to 20 bar
Product flow-rate
0 to 30 kg/min
Machine motor power
2,2 kW
Comp. absorbed air flow-rate
366 L/min
Compressor power
2,2 kW
Maximum air pressure
10 bar
Power supply
230 V - 16 A - 50 Hz
Tank capacity
100 L
Maximum grain size
6 mm
Pump
MAP 6
Integrated vibrator
yes
Dimensions (L x w x h)
130 x 70 x 75 cm
Weight
143 kg
Noise level
96 Lwa
Delivered with
- a Ø32 mm x 10 m air/product hose
- a pressure controller with adapter
- a carry-case containing:
- a pressure controller with adapter
- a carry-case containing:
- an ABS mortar spray lance
- eight spraying nozzles (Ø8, 10, 12, 14, 16, 18, 20 & 22 mm)
- three grouting nozzles (Ø10, 12 & 14 mm)
- two cleaning balls and a tube brush
- a cleaning brush
- an unplugging brush
- a 7 mm Allen key
Réf. 3B03312000
Cat. C2
EAN : 8099998229489
Public price
10 490,00 € pre-tax
Description
Spraying machine for mortars and exterior coatings.
Equipped with a stainless steel tank, a digital control panel and a twin-cylinder compressor.
Equipped with a stainless steel tank, a digital control panel and a twin-cylinder compressor.
Applications
Traditional mortars with admixtures, hydraulic coatings, monolayers, lime-based coatings, high-load technical and special coatings, repointing coatings...
With optional lance and pump:
Glues and E.W.I. coatings, thick plastic coatings, light hydraulic coatings...
With optional lance and pump:
Glues and E.W.I. coatings, thick plastic coatings, light hydraulic coatings...
Technical characteristics
Product pressure
0 to 20 bar
Product flow-rate
0 to 30 kg/min
Machine motor power
2,2 kW
Comp. absorbed air flow-rate
366 L/min
Compressor power
2,2 kW
Maximum air pressure
10 bar
Power supply
230 V - 16 A - 50 Hz
Tank capacity
100 L
Maximum grain size
6 mm
Pump
MAP 6
Integrated vibrator
yes
Dimensions (L x w x h)
130 x 70 x 75 cm
Weight
143 kg
Noise level
96 Lwa
Delivered with
- a Ø32 mm x 10 m air/product hose
- a pressure controller with adapter
- a carry-case containing:
- a pressure controller with adapter
- a carry-case containing:
- an ABS mortar spray lance
- eight spraying nozzles (Ø8, 10, 12, 14, 16, 18, 20 & 22 mm)
- three grouting nozzles (Ø10, 12 & 14 mm)
- two cleaning balls and a tube brush
- a cleaning brush
- an unplugging brush
- a 7 mm Allen key
Product datasheet Advice & Documents